Instructions:

1. Fray the edges of the red rectangle by pulling threads from each side.
2. Remove one side of the fusible web and fuse it to the wrong side of the red fabric.
3. Remove the paper from the other side of the fusible web. Position the red print onto the kraft tag. If it curls, gently bend it the opposite direction to flatten.
4. Punch star holes as shown.
5. Fold each of the three green print squares as shown below.
6. Trim the largest square in half horizontally to form a triangle.
7. Glue the green print pieces into position as shown.
8. Glue on the tree trunk and ground twigs as shown.
9. Fold the fibers in half. Insert the folded loop into the hole at the top of the kraft tag. Put the ends of the fibers through the folded loop and pull gently to tighten.