Decoupáge

Instructions:

1. Cover work area with newspaper or plastic.
2. Cut out shapes from fabric, decoupáge paper or napkin.
3. Using a foam brush, apply a coat of glue to the back of the cutout.
4. Apply the cutout to the desired surface.
5. Brush a coat of glue on the top of the cutout, covering the entire surface.
6. Repeat until the surface has been covered.
7. Brush 2-3 coats of decoupáge glue over the entire design. Allow each coat to dry before applying the next one.

Hint:

• Use an embossing heat tool or hair dryer to speed drying time.